[nsp] Serial Interface end-to-end with Channelized E1 card

[Ezequiel Carson]

welcome.



On Wed, 2002-08-07 at 17:59, Tay Chee Yong wrote:
> Hi Ezequiel,
> 
> There was an issue with the Telco provider here, and they had resolved the
> issue. Both ends are up and running now.
> 
> Thanks for the assistance.
> 
> Regards,
> Cheeyong
> 
> On 7 Aug 2002, Ezequiel Carson wrote:
> 
> > Tay,
> >
> >        What is state of the controller e1? Do you have any alarm like
> > Remote Alarm or No signal?
> >
> > Ezequiel
> >
> >
> >
> > On Wed, 2002-08-07 at 05:18, Tay Chee Yong wrote:
> > > Thanks. I actually tried to configured the following configuration on my router
> > > and my customer's router, but the line doesn't seems to come up... Currently, I
> > > am still checking with our Telco provider.
> > >
> > > Was wondering if there was something which I had missed out in the
> > > configuration.
> > >
> > > Thanks for your assistance.
> > >
> > > Regards,
> > > Cheeyong
> > >
> > > On 6 Aug 2002, Ezequiel Carson wrote:
> > >
> > > > conf t
> > > > cont e1 1/1
> > > > channel group 0 time slot 1-8
> > > >
> > > > int s1/1:0
> > > > ip add x.x.x.x 255.255.255.252
> > > > -------------
> > > >
> > > > conf t
> > > > cont e1 2/0
> > > > channel group 0 timeslot 1-8
> > > >
> > > > int s2/0:0
> > > > ip add x.x.x.x 255.255.255.252
> > > >
> > > >
> > > >
> > > > On Tue, 2002-08-06 at 14:06, Tay Chee Yong wrote:
> > > > > Hi,
> > > > >
> > > > > May I know if anyone had ever configure serial interfaces on a point-to-point
> > > > > connection, with both end using the Channelized E1 card?
> > > > >
> > > > > |--------------------------------              |-----------------------------|
> > > > > |  7206 with                    |              |  7206 with 2 port           |
> > > > > | 2 port channelized e1         |    PSTN      | channelized e1              |
> > > > > |  E1 1/1                       |--------------| E1 2/0                      |
> > > > > |channel group 0 time slot 1-8  |              |channel group 0 timeslot 1-8 |
> > > > > ---------------------------------              |-----------------------------|
> > > > >
> > > > > If so, would appreaciate any advise on how to configure both ends who are using
> > > > > lease line. Thanks.
> > > > >
> > > > > Regards,
> > > > > Cheeyong
> > > > >
> > > > > _______________________________________________
> > > > > cisco-nsp mailing list  real_name)s@puck.nether.net
> > > > > http://puck.nether.net/mailman/listinfo/cisco-nsp
> > > > > archive at http://puck.nether.net/pipermail/cisco-nsp/
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
> 
>