[nsp] 2ct3-pa question

[Joshua Smith]

hello all - 

i have a question regarding the below card - PA0 is a 2ct3, basically,
what i need to find out is how to make the second controller a clear-channel
ds3.  the first one will be channelized, the second won't
when i enter the command 'no channelized' under controller t3 12/0/1, it
doesn't recognize the command.

am i missing something?

thanks



Slot 12:
        Physical slot 12, ~physical slot 0x3, logical slot 12, CBus 0
        Microcode Status 0x4
        Master Enable, LED, WCS Loaded
        Board is analyzed
        Pending I/O Status: None
        EEPROM format version 1
        VIP4-80 RM7000 controller, HW rev 2.02, board revision B0
        Serial number: 18936224  Part number: 73-3143-02
        Test history: 0x00        RMA number: 00-00-00
        Flags: cisco 7000 board; 7500 compatible

        EEPROM contents (hex):
          0x20: 01 22 02 02 01 20 F1 A0 49 0C 47 02 00 00 00 00
          0x30: 58 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

        Slot database information:
        Flags: 0x4      Insertion time: 0x2E29A9B0 (00:25:33 ago)

        Controller Memory Size: 128 MBytes CPU SDRAM, 64 MBytes Packet SDRAM

        PA Bay 0 Information:
                2CT3 single wide PA, 2 ports
                EEPROM format version 1
                HW rev 1.00, Board revision A0
                Serial number: 16756827  Part number: 73-3388-03

        PA Bay 1 Information:
                Mx Serial PA, 8 ports
                EEPROM format version 1
                HW rev 1.16, Board revision A0
                Serial number: 23585452  Part number: 73-1580-09

        --Boot log begin--

Cisco Internetwork Operating System Software
IOS (tm) VIP Software (SVIP-DW-M), Version 12.2(11)T1,  RELEASE SOFTWARE
(fc2)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Sat 28-Sep-02 00:07 by ccai
Image text-base: 0x60010930, data-base: 0x60440000


        --Boot log end--