[nsp] c2500 Async line problem - noise and overrun

[Temkin, David]

Are you sure that you have "no exec" listed on every line that's got another
device connected to it?

> -----Original Message-----
> From: Sophia Lei [mailto:sophialeii@yahoo.com] 
> Sent: Saturday, November 16, 2002 10:55 AM
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] c2500 Async line problem - noise and overrun
> 
> 
> Hello,
> 
> We have C2500 used as a comm server.  The Async line
> connecting to other routers has kept accupied (busy)
> even there is no users.
> 
> From show line output, we see a lot of noise and
> overrun.  We have replaced cables but this does not
> solve the problem.  Is there any command we can try
> under the async configuration to solve the problem,
> before we replace the hardware?
> 
> Thank you for your help in advance.
> 
> Sophia
> 
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Web Hosting - Let the expert host your site 
http://webhosting.yahoo.com _______________________________________________
cisco-nsp mailing list  real_name)s@puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


IMPORTANT:The information contained in this email and/or its attachments is
confidential. If you are not the intended recipient, please notify the
sender immediately by reply and immediately delete this message and all its
attachments.  Any review, use, reproduction, disclosure or dissemination of
this message or any attachment by an unintended recipient is strictly
prohibited.  Neither this message nor any attachment is intended as or
should be construed as an offer, solicitation or recommendation to buy or
sell any security or other financial instrument.  Neither the sender, his or
her employer nor any of their respective affiliates makes any warranties as
to the completeness or accuracy of any of the information contained herein
or that this message or any of its attachments is free of viruses.