[nsp] Configuring Cisco 1700 router.

[Erik Enge]

"Stephen J. Wilcox" <steve@telecomplete.co.uk> writes:

> Up/Down means your router sees the plug in the wall but not whats on
> the other side, you need to make sure the serial link is using the
> correct encapsulation on both ends of the link .. this would depend on
> who and what your connected to here.

Ah!  Setting encapsulation to hdlc solved that.  I now see:

  Serial0 is up, line protcol is up.

I still can't ping mine or the remote IP (192.168.12.1 and 192.168.12.2)
so I guess something is fishy with the ethernet interface.  I'll see if
I can track it down.

Thanks!

Erik.