[nsp] 4 Mbps through a 1720?

[Jack.W.Parks at alltel.com]

If you are Cisco on both sides, run CEF "per-packet" load balancing.
You should balance the links very close to what MLPPP can provide, with
lower CPU.

Jack

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Vincent De
Keyzer
Sent: Wednesday, December 17, 2003 2:13 AM
To: cisco-nsp at puck.nether.net
Subject: [nsp] 4 Mbps through a 1720?


Hi folks,
 
do you think I can use a 1720 as a CPE to push 4 Mbps of Internet
traffic to my customer?
 
There would be nothing like access lists or any other CPU-intensive
configs on it - except Multilink PPP to bundle the two E1s together.
 
Of course, if somebody has a better idea than MLPPP to share load on the
two links, he is welcome to speak.
 
Vincent
 
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/