[nsp] 12.3.(1)a (Router Lockup Edition)

[Niels Bakker]

* chrismcc at pricegrabber.com (Christopher McCrory) [Thu 17 Jul 2003, 21:51 CEST]:
[..]
> You didn't mention which feature set you were using.  But if you happen
> to be getting service provider/SSH, note that the name changes:
> SERVICE PROVIDER/SECURE SHELL 3DES
> SERVICE PROVIDER/SECURED SHELL 3DES
> This makes it _real_ hard to "version shop"

Or how about (for 7200)

BOOT IMAGE(ON I/O CARD W/2GE OR 2FE/E)
BOOT IMAGE (ON I/O CARD W/2GE OR 2FE/E)

... which makes it only slightly harder.

Still not seeing why one needs a boot image in the first place.  A 7200
I upgraded today turned out to have an image with bad checksum on its
bootflash so the router refused to load it but booted anyway, straight
off disk0:.


	-- Niels.

--