[nsp] 12.2 image for 7200s

[Clayton Zekelman]

At 04:23 PM 18/07/2003 -0400, you wrote:
>	This works fine.
>
>	I used ATA disk in npe-150 without problems as long as the
>bootflash: images supports it.
>
>	Same goes for the RSP4 as well.  As long as your bootflash:
>image supports the ATA disk, you can boot off of it.  You can not
>however access it via rommon, which means make sure your bootflash:
>image works.  otherwise you can end up with a very dead router.

If I do happen to corrupt my bootflash:, could I boot off a linear PCMCIA
card, and recover the bootflash, or recover through the serial console?

Just want to make sure I have my "Plan C" ready... (Plan B is to shove the
PA-POS into the other 7200 and prey)  :-)

>
>-- 
>Jared Mauch  | pgp key available via finger from jared at puck.nether.net
>clue++;      | http://puck.nether.net/~jared/  My statements are only mine.
> 

---
Clayton Zekelman
Managed Network Systems Inc. (MNSi)
344-300 Tecumseh Rd. E.
Windsor, Ontario
N8X 5E8

tel. 519-985-8410
fax. 519-258-3009