[nsp] 12.2 image for 7200s

[Siva Valliappan]

> At 04:23 PM 18/07/2003 -0400, you wrote:
> >	This works fine.
> >
> >	I used ATA disk in npe-150 without problems as long as the
> >bootflash: images supports it.
> >
> >	Same goes for the RSP4 as well.  As long as your bootflash:
> >image supports the ATA disk, you can boot off of it.  You can not
> >however access it via rommon, which means make sure your bootflash:
> >image works.  otherwise you can end up with a very dead router.
>
> If I do happen to corrupt my bootflash:, could I boot off a linear PCMCIA
> card, and recover the bootflash, or recover through the serial console?
>

yep.  if you corrupt your bootflash, and you have older ROMMONs that don't
support ATA disks, insert a PCMCIA flash in the other slot and use it to boot.

cheers
.siva