[nsp] 12.2 image for 7200s

[Roy]

I was able to put the bootloader upgrade to 12.0(23)S1 in slot1 on a 
flash card.  I then put a Compact Flash card with PCMCIA adapter in as 
disk0 with 64MB capacity and boot from that.


Clayton Zekelman wrote:
> I'm currently running 12.2(2)T1 on an NPE-300 and an NPE-150
> (c7200-is-mz.122-2.T1.bin).
> 
> I tried to download the most recent release in that train to eliminate my
> exposure to the IPv4 bug that would still fit in my 16M flash cards.
> Although 12.2(15)T5 says it will fit, it is exactly 996 bytes too large for
> a 16M flash card.  Anyone have any suggestions?
> 
> Current considerations include using tftp to boot until my 64M FlashDisk
> cards come in, at which time I'm considering a 12.3 release.
> 
> I know on the NPE-150, I'm going to run into problems.  I upgraded the
> bootflash to c7200-boot-mz.120.27.bin in the hopes that its recent enough
> to read a FlashDisk filesystem.  Anyone have any experience with this?
> 
> 
> 
> ---
> Clayton Zekelman
> Managed Network Systems Inc. (MNSi)
> 344-300 Tecumseh Rd. E.
> Windsor, Ontario
> N8X 5E8
> 
> tel. 519-985-8410
> fax. 519-258-3009
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 
>