[nsp] ATA-186's back to back?

Temkin, David temkin at sig.com
Tue Jul 29 13:47:39 EDT 2003


Actually, both sides are "stations", so FXS will be fine on both sides (this
will be functioning as a "trunk" between two phone systems, not a CO->Phone
type setup).  So, in that case, is it possible to do it?

-----Original Message-----
From: Jared Mauch [mailto:jared at puck.nether.net] 
Sent: Tuesday, July 29, 2003 12:49 PM
To: Temkin, David
Cc: cisco-nsp at puck.nether.net
Subject: Re: [nsp] ATA-186's back to back?


	The ATA-186 is a FXS interface.

	You can not connect them back-to-back.  If you are attempting to do
hook them together, you need opposing types.

	Something like FXS on the ata-186 to a FXO interface on some other
device.  I don't believe that Cisco makes anything that supports SIP (for
example) other than their IOS based routers (26xx,36xx)

	You need a NM-1V or NM-2V as well as the VIC-FXO (or VIC-2-FXO) to
connect to an ATA-186.

	- Jared

On Tue, Jul 29, 2003 at 12:43:27PM -0400, Temkin, David wrote:
> Does anyone know if it's possible to connect ATA-186's back to back 
> with each other?  Does anyone have any sample configs they could 
> share?
> 
> Thanks,
> 
> -Dave
> 
> David Temkin
> S-I-G
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.


More information about the cisco-nsp mailing list