[nsp] "sh run" give me "Unable to read Configuration.Try Again later"HELP!

[Jack.W.Parks at alltel.com]

A common problem is another user that is logged into the router has
issued a "sh run" and is sitting at a "---more---" prompt.

Clear all logged in users, and it should fix your problem.

Jack W. Parks IV
Sr. Network Engineer
ALLTEL Communications
jack.w.parks at alltel.com
Work: 501-905-5961
Cell: 501-680-3341


-----Original Message-----
From: mac [mailto:mac at telvia.it] 
Sent: Wednesday, July 30, 2003 9:22 AM
To: cisco-nsp at puck.nether.net
Subject: [nsp] "sh run" give me "Unable to read Configuration.Try Again
later"HELP!


I all,

i'm on panic! I have a core router that is working correctly but when i 
try "sh run"  or "wr" i get:

"Unable to read Configuration. Try Again later"

I'm unable to register config changes.

I want to try to restart the router but i want to be sure that is 
software problem before that.
Otherwise  the "sh startup-config" command works correctly.

Can one give some help with his experiences?

Mac

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/