[nsp] 12.0S images for 2600

[rpcbind at speakeasy.net]

Check the archives for the 2500 K4 images, IIRC, it was under 
/crypto/beta/wizjam or such.

Ran into the same problem w/ 2620's and 12.0 -- make sure you don't use a 
"generic" 2600 image -- many (all?) 12.0's didn't include support for the 
FastEther, instead you'll need a 2620 specific image.

On Thu, 19 Jun 2003, Richard A Steenbergen wrote:

> So, does anyone remember those lovely K4P 12.0S images for 2500/2600 and 
> the like? You know, the ones that run without needing to spend more in 
> flash/dram upgrades than you can buy the 2600 for on the used market? :)
> 
> They're still around in the usual places, and they seem to still boot:
> 
> Router#sh ver
> Cisco Internetwork Operating System Software 
> IOS (tm) C2600 Software (C2600-K4P-M), Version 12.0(25)S, EARLY DEPLOYMENT 
> RELEASE SOFTWARE (fc1)
> 
> But they also seem to have a nasty habit of making the FastEthernet
> interfaces on a 2621 disappear from software. I know this used to work
> just fine with older images, but ftp.cisco.com only seems to carry 24 and
> 25 for 2600 these days. Is this a known problem, does anyone have copies
> of the old classics that still work, or is there another image that is
> better suited for SSH and terminal server use with only 32mb-48mb dram and
> 8mb flash? If so, I must be missing it. :)
> 
> -- 
> Richard A Steenbergen <ras at e-gerbil.net>       http://www.e-gerbil.net/ras
> GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC)
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>