[nsp] qos pre-classify

Ali Kemal Yurtseven yurtseven at meteksan.net.tr
Thu Mar 13 10:00:03 EST 2003


	I'm trying to configure qos on tunnel interfaces. There is a
tunnel between the office and hq, and ssh traffic needs to be
privileged. I tried the configuration below , however it doesn't' seem
to work, i.e when there is high traffic, ssh doesn't' work well. Any
ideas ? Btw tunnel interfaces don't accept cbwfq, so I tried changing
the precedence. 

Router#sh run int tunnel 0
Building configuration...

Current configuration : 168 bytes
interface Tunnel0
 ip address
 qos pre-classify
 service-policy output Privilege
 tunnel source
 tunnel destination

Router#sh pol
Router#sh policy-map Privilege
  Policy Map Privilege
    Class Privilege
      set precedence 5
Router#sh clas
Router#sh class-map Privilege
 Class Map match-all Privilege (id 1)
   Match protocol ssh

Ali Kemal Yurtseven
Network Engineer
Meteksan Net
Phone: +90 312 2979035
Fax  : +90 312 2979155

More information about the cisco-nsp mailing list