[nsp] 12.2.14S issues

[Hank Nussbacher]

On Wed, 26 Mar 2003 jlewis at lewis.org wrote:

> I'm running this version now on a 7513 and a pair of 7206's and have run
> into a couple of issues.
> 
> 1) policy routing (setting the output interface based on an IP extended
> access-list in a route-map) doesn't appear to work on the 7513.Traffic
> stillgoes out via whichever interface is appropriate based on the routing
> table (this router has full BGP routes).I'm trying to force packets from 
> 2 source addresses out via a particular transit provider.

Seen this often.  Try using numbered acls rather than named acls.  Just
might do the trick.  Let me know.

-Hank

> 
> 2) on the 7206's, the CLI is unstable and seems to lock up when large
> amounts of data are entered or displayed...especially if I try to paste a
> line or several lines into the config (conf t).When this happens, I have
> to kill my telnet and reconnect to the router.I'm seeing this on 2 
> 7206's (one's a VXR NPE300, one's a non-VXR NPE200) in two different POPs.
> 
> Images I'm using are:
> rsp-pv-mz.122-14.S.bin
> c7200-p-mz.122-14.S.bin
> 
> Has anyone else noticed these problems?
> 
> ----------------------------------------------------------------------
>  Jon Lewis *jlewis at lewis.org*|I route
>  System Administrator      |  therefore you are
>  Atlantic Net              |  
> _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________
> 
> _______________________________________________
> cisco-nsp mailing listcisco-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 

Hank Nussbacher