FW: [nsp] 7507 high cpu usage, ip rib update

[Jeffrey Wheat]

I'll try this again, has anyone seen anything like
this or could offer suggestions? Any update, I have
upgraded to 12.3.4T.

Many thanks.
Jeff

I have had a 7507 with 2 full bgp views running without
a hitch for over 27 weeks and then suddenly the router
is borking on me. I am seeing high cpu utilization, am
having "lockups" where am unable to ping through, the 
interfaces show up/down and short of power cycling the 
router, it remains in this state for well over 45 mins.

The router is running 12.2.13T, has a RSP4, 256M RAM.
The problem began early Monday when one of my upstreams
reset the BGP session with us. I see that the IP RIB
UPDATE process is consuming large amounts of the cpu.

Has anyone else seen anyone like this recently? It seems
very odd for this to just happen out of the blue.

Regards,
Jeff

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.536 / Virus Database: 331 - Release Date: 11/3/2003
 

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.536 / Virus Database: 331 - Release Date: 11/3/2003
 

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.536 / Virus Database: 331 - Release Date: 11/3/2003