[nsp] Newbie Question: Wic-2t on 3640 running IOS 12.3

[Gert Doering]

Hi,

On Thu, Nov 20, 2003 at 02:21:25PM -0800, Bruce Pinsky wrote:
> Suspect it is a software issue.  From cisco.com I find it is supported in:
> 
> Cisco IOS versions 12.0(7)XK, 12.1(1)T, 12.2, 12.2T
> 
> when it is installed in the NM-2FE2W network module.    Where it is
> supported without restriction, it says it is supported in all versions.
> 
> I'd try loading a 12.2T image and see if it shows up.

I would be very surpised if hardware that's supported in 12.2 main would
get dropped from 12.3 without prior and well-visible announcement.

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de