[nsp] Policy routing next-hop

[Steve Francis]

Use "set ip next-hop", not "set next hop."

Works for me.

(Although what the distinction is, I do not know.)

Sam Stickland wrote:

>Hi,
>
>I'm trying to route all traffic on a specific VLAN out to a different
>router.
>
>I've tried the following:
>
>access-list 30 permit ip a.b.c.0 0.0.0.255
>
>route-map sendviaWxyz permit
>  match ip address 30
>  set next-hop w.x.y.z
>
>int vlan 3
>  ip policy route-map sendviaWxyz
>
>Vlan 3 is VLAN on our LAN, that I want to send out via a specific peer.
>
>With no joy.. Have even tried using an extended access-list with 'permit ip
>any any', and routemaps with no match clauses and routemaps with 'match
>interface vlan3' etc. etc.
>
>I'm really stumped, so I'd appreciate any idea's anyone might have.
>
>This is on a Cat6500 with a Sup2-MFSC2-PFC2 and IOS 12.1(11r)E1a
>
>Thanks,
>
>Sam
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/
>  
>