[nsp] Marking ToS bits using CatOS on 6509

[Brennan_Murphy at NAI.com]

No one wants to touch this one, I see. 

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Murphy, Brennan
Sent: Tuesday, October 07, 2003 9:57 AM
To: cisco-nsp at puck.nether.net
Subject: [nsp] Marking ToS bits using CatOS on 6509


I want to set ToS bits using the CatOS
on a 6509. Wondering if this this
config does what I think it does
which is to mark packets emanating
from port 3/22 with DSCP values of 40.

set qos enable
set qos acl ip ACL_ANY dscp 40 tcp any any 
set port qos 3/22 port-based 
set qos acl map ACL_ANY 3/22

Am I missing anything?  I just want to set the
ToS bits using the switch instead of a default
gateway. 


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/