[nsp] hspr prob - can't ping active address

[matthew zeier]

>
> CSCdx10170 Bug text:
>
> Symptoms: A router may stop replying to Address Resolution Protocol (ARP)
> requests.
>
> Conditions: This symptom is observed on a Cisco router that is used as the
> active Hot Standby Router Protocol (HSRP) router for certain HSRP groups.
> The
> router may stop replying to ARP requests that are sent to the IP address
of
> the
> HSRP. This symptom occurs only if HSRP is configured on more than one
> interface.
>
> Workaround: Configure the no standby redirects global
> configuration command on the HSRP router, and then remove and re-add the
> standby <group> ip command.


Is that a feature found in releases greater than 12.1(8a)E5 ?  I'm running
that on a 9509 MSFC2 and there is no 'standby redirect' .  Infact, I can't
even do a 'debug standby events icmp'.

- mz