[nsp] Need some help w/ as5300 config

[John Wong]

Yo Brett,

Nothing related to your Qs BUT a friendly advise..
I would suggest you remove those nasty password lines
from your configs when you post it to a public newsgroup.
You do know that Cisco's password are reversible right?
And from your IPs, it seems like this is not a lab device
and is connected over the Internet which makes it possible
for someone to gain access to it.

Regards.

> -----Original Message-----
> From: Brett Hays [mailto:bretth at htonline.net] 
> Sent: Saturday, September 06, 2003 11:55 AM
> To: cisco-nsp at puck.nether.net
> Subject: [nsp] Need some help w/ as5300 config
> 
> 
> We just added our second channelized T1 on a Cisco as5300 and 
> we're having
> problems getting it programmed correctly.  I know Lucent 
> PM3's and Total
> Controls just fine, but could really use some help with the 5300.
> 
> If you happen to be using an AS5300 and could share your 
> config it would be
> a huge help to us.
> 
> Just a working config for multiple channelized T1 on AS5300.  I have
> included our config below, if someone can just tell us what 
> we have setup
> wrong?!?
> 
> Thanks!!
> 
> Brett Hays
> Hometown Online
> www.htonline.net
> 
> aaa session-id common
> enable secret 5 $1$n3xz$W.CeCi3ycsRUT24rvNAZt/
> enable password 7 044808561B
> !
> username sjgreen password 7 0309480A011D2E
> username bhays password 7 075E721B1E
> spe 1/0 1/7
>  firmware location flash:mica-modem-pw.2.9.2.0.bin
> spe 2/0 2/7
>  firmware location flash:mica-modem-pw.2.9.2.0.bin
> !
> !
> resource-pool disable
> clock timezone gmt -5
> !
> modem-pool 1
>  pool-range 1-48
>  called-number 5241807 max-conn 48
> !
> modem-pool 0
> !
> modem startup-test
> modem answer delay 1
> ip subnet-zero
> ip domain-name htonline.net
> ip name-server 12.159.200.23
> ip name-server 12.127.16.68
> !
> async-bootp dns-server 12.159.200.23 12.127.16.68
> modemcap entry mica-kflex
> !
> controller T1 0
>  framing esf
>  clock source line primary
>  linecode b8zs
>  cablelength short 133
>  ds0-group 0 timeslots 1-24 type e&m-fgb
>  description 1R.DKSA.000531.001.GTEN
> !
> controller T1 1
>  framing esf
>  clock source line secondary 1
>  linecode b8zs
>  cablelength short 133
>  ds0-group 1 timeslots 1-24 type e&m-fgb
>  description 1R.DKSA.000531.002.GTEN
> !
> controller T1 2
>  framing sf
>  linecode ami
> !
> controller T1 3
>  framing sf
>  linecode ami
> !
> !
> !
> interface Ethernet0
>  no ip address
>  shutdown
> !
> interface Serial0:23
>  no ip address
>  no keepalive
>  shutdown
>  no cdp enable
> !
> interface FastEthernet0
>  ip address 12.159.XXX.XX 255.255.255.224
>  duplex full
>  speed 100
> !
> interface Group-Async1
>  ip unnumbered FastEthernet0
>  encapsulation ppp
>  no ip route-cache
>  no ip mroute-cache
>  async mode dedicated
>  peer default ip address pool setup-pool
>  no fair-queue
>  ppp authentication chap
>  group-range 1 96
> !
> interface Dialer0
>  no ip address
>  dialer-group 1
> !
> ip local pool setup-pool 12.159.201.1 12.159.201.254
> ip default-gateway 12.159.200.1
> ip classless
> ip route 0.0.0.0 0.0.0.0 FastEthernet0
> ip route 12.159.203.0 255.255.255.192 12.159.200.11
> no ip http server
> ip http port 8080
> !
> snmp-server community htonline RO
> snmp-server enable traps tty
> radius-server host XX.XXX.XXX.XX auth-port 1645 acct-port 1646
> radius-server retransmit 3
> radius-server key ht0nlin3
> !
> call progress tone country usa
> !
> line con 0
>  autoselect during-login
> line 1 96
>  session-timeout 20
>  no flush-at-activation
>  absolute-timeout 480
>  modem InOut
>  modem autoconfigure type mica
>  autoselect ppp
> line aux 0
> line vty 0 4
>  password 7 11010D55191E020257
> !
> end
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>