[nsp] Strange new error message re header-compression

[Dennis Peng]

This is a bug: CSCeb50099.

Dennis

Roy [garlic at garlic.com] wrote:
> Upgraded my 7200 to 12.3(2)T1.  Now when I write the config I get error 
> messages.
> 
> %Serial1/1:0 :Header-Compression not configured on interface
> %Serial1/1:0.1 :Header-Compression not configured on interface
> %Serial1/1:0.2 :Header-Compression not configured on interface
> 
> The message does not seem to be documented on the web site
> 
> That interface is a frame relay circuit.  Attempts to figure out how to 
> turn the message off have failed.
> 
> Commands like
> 
>      no frame-relay ip rtp header-compression
> 
> give errors about the encapsulation being wrong for header compression 
> or that compression is off
> 
> Any ideas?
> 
> Roy
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/