[nsp] Hardware WCCP on 6500

Clinton Work clinton at scripty.com
Thu Sep 18 23:00:05 EDT 2003


Our Cisco SEs told us that WCCP would be supported on the Sup720, but it
wouldn't be any better than the Sup2. Its possible that the current 12.2S
code doesn't support it yet.


===================================
Clinton Work                clinton at scripty.com
Airdrie, AB


----- Original Message ----- 
From: "Lincoln Dale" <ltd at cisco.com>
To: "Antoine Versini" <vox at t-online.fr>
Cc: <cisco-nsp at puck.nether.net>
Sent: Thursday, September 18, 2003 5:29 PM
Subject: Re: [nsp] Hardware WCCP on 6500


> At 04:32 AM 19/09/2003, Antoine Versini wrote:
> >I also had confirmation that the SUP720 is not WCCP capable at all. I
> >found this rather strange as the "ip wccp xxxx"  commands are available
in
> >the MSFC3 IOS, but I'm told they are indeed inneffective.
>
> [ i'll preface this with the same opening sentence as last time; its been
a
> while since i was involved with WCCP - but i still believe this
information
> to be accurate & correct ]



More information about the cisco-nsp mailing list