[c-nsp] Netflow export from 6500 w/sup-720

[Tim Stevenson]

You need "mls netflow" global command to enable PFC netflow. See if adding 
that helps.

Tim

At 09:00 AM 8/22/2004, cisco-nsp-request at puck.nether.net announced:
>Message: 1
>Date: Sun, 22 Aug 2004 15:53:11 +0200
>From: "Nicolaj Ottsen" <no at webpartner.dk>
>Subject: [c-nsp] Netflow export from 6500 w/sup-720
>To: <cisco-nsp at puck.nether.net>
>Message-ID: <3184238B10E5EE4E9B8D93FD1162C4FF7EA764 at hq.webpartner.dk>
>Content-Type: text/plain;     charset="us-ascii"
>
>Dear all
>
>We are trying to make a sup-720 export netflow version 5, but we only
>recive about 10 % of the expected flow at our collector.
>We checked the collector, so the problem seems to originate from the
>sup-720 (12.2(17d)SXB1).
>
>What am I missing ?
>
>Our config is as follows
>
>mls aging fast
>mls flow ip interface-full
>mls nde sender version 5
>
>ip flow-export source Loopback0
>ip flow-export version 5 origin-as
>ip flow-export destination x.x.x.x xxxx
>
>Interface xxx/xxx
>  ip route-cache flow
>
>Regards
>
>Nicolaj
>



Tim Stevenson, tstevens at cisco.com
Routing & Switching CCIE #5561
Technical Marketing Engineer, Catalyst 6500
Cisco Systems, http://www.cisco.com
IP Phone: 408-526-6759
********************************************************
The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.