[c-nsp] rate limiting on 6500s ?

[matthew zeier]

This is a 6500 running 7.6(1) on a Sup1 and MSFC.

I have the following 20Mbps "cap" set -

set qos policer aggregate twentymeglimit rate 20480 burst 256 drop
set qos acl ip quick dscp 0 aggregate twentymeglimit ip any  any
set qos acl map quick 9/9

Is this syntax even right?


cricket still shows spikes well above 20Mbps so I'm not clear if the syntax 
is right or if the ACL is after the interface counters increment.

--
matthew zeier, Sr. Network Engineer  | "Nothing in life is to be feared.
InteleNet Communications, Inc.       |  It is only to be understood."
(949) 784-7904                       |       - Marie Curie