[nsp] Suggestions on terminating a bunch of T1's
gert at greenie.muc.de
Wed Feb 4 17:34:32 EST 2004
On Wed, Feb 04, 2004 at 11:49:59AM -0800, Jim Devane wrote:
> Current first place design.
> Wrap the T1's into 40 M13's.
> Run the channelized DS-3's to a 7206 VXR full of PA-MC-2T3+
> I would need 4 7026 and use one of the PA's for an uplink of some sort.
Have you considered using the PA-MC-STM1 to put the T1s into STM1s?
(I'm not sure whether this is supported, and if yes, how many of them
can be used per 7206, but it sounds much nicer than to mess with DS-3s)
USENET is *not* the non-clickable part of WWW!
Gert Doering - Munich, Germany gert at greenie.muc.de
fax: +49-89-35655025 gert at net.informatik.tu-muenchen.de
More information about the cisco-nsp