[nsp] NM-1FE2W problem in CISCO 3745

[Majid Siddiq]

Make sure that the IOS of 3745 supports NM-1FE2W....majid

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Fast Track
Technologies
Sent: Friday, January 23, 2004 3:01 PM
To: cisco-nsp at puck.nether.net
Subject: [nsp] NM-1FE2W problem in CISCO 3745

Hello,

When we instal a brand new NM-1FE2W in the CISCO 3745 Router, the module
LED blinks once, and we get a message "Initialisation failed". However,
when we instal the same in a CISCO 3640 Router, the Module is detected
and enabled without any problem.

What could the problem be?

Thanks and Regards
Sunil Gulati
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/