[nsp] NM-1FE2W problem in CISCO 3745

[Fast Track Technologies]

The IOS is 12.3(5).


----- Original Message -----
From: "Majid Siddiq" <majid at pie.net.pk>
To: "'Fast Track Technologies'" <fast_track at vsnl.com>;
<cisco-nsp at puck.nether.net>
Sent: Friday, January 23, 2004 3:52 PM
Subject: RE: [nsp] NM-1FE2W problem in CISCO 3745


> Make sure that the IOS of 3745 supports NM-1FE2W....majid
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Fast Track
> Technologies
> Sent: Friday, January 23, 2004 3:01 PM
> To: cisco-nsp at puck.nether.net
> Subject: [nsp] NM-1FE2W problem in CISCO 3745
>
> Hello,
>
> When we instal a brand new NM-1FE2W in the CISCO 3745 Router, the module
> LED blinks once, and we get a message "Initialisation failed". However,
> when we instal the same in a CISCO 3640 Router, the Module is detected
> and enabled without any problem.
>
> What could the problem be?
>
> Thanks and Regards
> Sunil Gulati
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>