[nsp] 12.2 - input queue stuck?

[Jared Mauch]

	which 12.2 image are you speaking of?

	what was the image name when it was downloaded from cisco?

	- Jared

On Wed, Jan 28, 2004 at 02:04:23PM +0100, Tomas Daniska wrote:
> 
> hi all,
> 
> 
> one of our customers had just two of their boxes locked up
> 
> on some of the fasteths the interfaces were ignoring input packets, but
> output traffic went like charm
> 
> 'sh int told like'
> 
>   Input queue: 0/75/2902/13 (size/max/drops/flushes); Total output
> drops: 258
>   Queueing strategy: fifo
>   Output queue :0/40 (size/max)
>   30 second input rate 0 bits/sec, 0 packets/sec
>   30 second output rate 1000 bits/sec, 1 packets/sec
> 
> 
> while the switch where the box is connected was showing about 6 megs
> offered to the box.
> 
> this, however, does not seem to be related to the advisory that was
> released about half an year ago as input queue would have to show 76/75
> 
> 
> rebooting the box solved the problem of course
> 
> 
> 
> any hints please?
> 
> 
> thanks
> 
> --
>  
> Tomas Daniska
> systems engineer
> Tronet Computer Networks
> Plynarenska 5, 829 75 Bratislava, Slovakia
> tel: +421 2 58224111, fax: +421 2 58224199
>  
> A transistor protected by a fast-acting fuse will protect the fuse by
> blowing first.
> 
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/

-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.