[nsp] Output errors on ATM interface

[Vincent De Keyzer]

Hello,
 
I am seeing output errors on an ATM interface. What can be the cause of
those?...
 
Vincent
 
_______________________
 
alfonso#sh int atm 2/0
ATM2/0 is up, line protocol is up
  Hardware is ENHANCED ATM PA
  MTU 4470 bytes, sub MTU 4470, BW 149760 Kbit, DLY 80 usec,
     reliability 241/255, txload 1/255, rxload 3/255
  Encapsulation ATM, loopback not set
  Encapsulation(s): AAL5
  4095 maximum active VCs, 14 current VCCs
  VC idle disconnect time: 300 seconds
  0 carrier transitions
  Last input 00:00:00, output 00:00:00, output hang never
  Last clearing of "show interface" counters 00:00:22
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: Per VC Queueing
  5 minute input rate 2037000 bits/sec, 310 packets/sec
  5 minute output rate 587000 bits/sec, 248 packets/sec
     4923 packets input, 4342907 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
     3298 packets output, 574488 bytes, 0 underruns
     612 output errors, 0 collisions, 0 interface resets
     0 output buffer failures, 0 output buffers swapped out

 

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.690 / Virus Database: 451 - Release Date: 22/05/2004