[nsp] Output errors on ATM interface

[Niels Bakker]

* vincent at dekeyzer.net (Vincent De Keyzer) [Wed 02 Jun 2004, 21:23 CEST]:
> I am seeing output errors on an ATM interface. What can be the cause of
> those?...
>  
> alfonso#sh int atm 2/0
> ATM2/0 is up, line protocol is up
>   Hardware is ENHANCED ATM PA
>   MTU 4470 bytes, sub MTU 4470, BW 149760 Kbit, DLY 80 usec,
>      reliability 241/255, txload 1/255, rxload 3/255
                   ^^^
[..]
>      612 output errors, 0 collisions, 0 interface resets
>      0 output buffer failures, 0 output buffers swapped out

Tried a "show controllers" to see what might be going on a few levels lower?


	-- Niels.

--