[nsp] T3 to a 3640

[Gert Doering]

Hi,

On Fri, Jun 04, 2004 at 11:31:52AM -0400, Jon Lewis wrote:
> How many mbit/s do you really want to pass?  IME, a 3640 can't come close
> to handling a full T3 (this was with the older NM-1HSSI, if that matters).
> If you only need it to carry a few mbit/s, it'll work.  If you want full
> T3, I'd suggest something from the 7200 series.

A 3660 or 3745 should do... - the 3745 is more powerful than a lower-end
7200 (don't have the exact pps and mbit/s. "glossy paper" numbers at
hand, though).

In any case, the NM-1T3/E3 is not officially supported on the 3640.  I
have no idea whether it will work, and just not perform properly, or
whether it won't even be recognized by IOS...

gert


-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de