[nsp] Tcam capacity on 7603/Sup2/Msfc2

[Steve Francis]

Konstantin Barinov wrote:

>Hi,
>
>Any guru of 6500/7600 can help? System is 7603/Sup2/Msfc2, IOS 12.1(20)E2
>  
>
Try
mls aclmerge algorithm odm

See 
http://cio.cisco.com/en/US/customer/products/hw/switches/ps708/products_white_paper09186a00800c9470.shtml
Much more efficient in my experience...

>
>Mar  5 20:05:31: %QM-4-TCAM_LABEL: Hardware TCAM label capacity exceeded
>Mar  5 20:05:31: %QM-SP-4-WARNING: TCAM request replace [lkup=1] status:6
>
>After this mls qos and policy routing stops.
>
>Access-lists are small, maybe 250 lines all together.
>
>#sh tcam counts
>           Used        Free        Percent Used       Reserved
>           ----        ----        ------------       --------
> Labels:      4         508            0
>
>ACL_TCAM
>  Masks:     36        4060            0                     0
>Entries:     71       32697            0                     0
>
>QOS_TCAM
>  Masks:     50        4046            1                     0
>Entries:     84       32684            0                     0
>
>    LOU:     12          52           18
>  ANDOR:      1          15            6
>  ORAND:      0          16            0
>    ADJ:      1        1023            0
>
>
>    
>br
>--
>Konstantin Barinov
>INFONET AS, Tallinn, Estonia
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/
>  
>