[nsp] Tcam capacity on 7603/Sup2/Msfc2

[Konstantin Barinov]

it is there.

#sh conf | incl acl
mls aclmerge algorithm odm
mls aclmerge odm optimizations



br
--
Konstantin Barinov
INFONET AS, Tallinn, Estonia

Friday, March 5, 2004, 9:27:59 PM, you wrote:

SF> Konstantin Barinov wrote:

>>Hi,
>>
>>Any guru of 6500/7600 can help? System is 7603/Sup2/Msfc2, IOS 12.1(20)E2
>>  
>>
SF> Try
SF> mls aclmerge algorithm odm

SF> See 
SF> http://cio.cisco.com/en/US/customer/products/hw/switches/ps708/products_white_paper09186a00800c9470.shtml
SF> Much more efficient in my experience...

>>
>>Mar  5 20:05:31: %QM-4-TCAM_LABEL: Hardware TCAM label capacity exceeded
>>Mar  5 20:05:31: %QM-SP-4-WARNING: TCAM request replace [lkup=1] status:6
>>
>>After this mls qos and policy routing stops.
>>
>>Access-lists are small, maybe 250 lines all together.
>>
>>#sh tcam counts
>>           Used        Free        Percent Used       Reserved
>>           ----        ----        ------------       --------
>> Labels:      4         508            0
>>
>>ACL_TCAM
>>  Masks:     36        4060            0                     0
>>Entries:     71       32697            0                     0
>>
>>QOS_TCAM
>>  Masks:     50        4046            1                     0
>>Entries:     84       32684            0                     0
>>
>>    LOU:     12          52           18
>>  ANDOR:      1          15            6
>>  ORAND:      0          16            0
>>    ADJ:      1        1023            0
>>
>>
>>    
>>br
>>--
>>Konstantin Barinov
>>INFONET AS, Tallinn, Estonia
>>
>>_______________________________________________
>>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>https://puck.nether.net/mailman/listinfo/cisco-nsp
>>archive at http://puck.nether.net/pipermail/cisco-nsp/
>>  
>>