[nsp] 7500 AC Power Cords

Konstantin Barinov sbr at infonet.ee
Mon Mar 29 15:15:59 EST 2004


did not know about that.

but it is complicated to find those special cords here, so when
equipment from e-bay comes without cords, there is no other way
to plug it.

Thanks for information.


br
--
Konstantin Barinov
INFONET AS, Tallinn, Estonia


Monday, March 29, 2004, 10:48:46 PM, you wrote:

ROC> Beprojects.com wrote:

>>Does anybody have a place to order longer-than-normal AC power cords for the
>>7500 series AC power supplies?  There is a little slot in them where they
>>are plugged into the PS, so I can't use a standard cord.  I am looking for
>>~10' cords.  Thanks.
>>  
>>

ROC> It's probably an IEC320 connector, from the sounds of your description
ROC> it's a C15/C16 which are are higher-current version of the standard
ROC> connector. (The standard connector itself is capable of more than 3A,
ROC> but it's usually put on the end of something with a 3A fused plug in it)

ROC> The "normal" connector you see is an IEC320-C13 or -C14. (C13 is female,
ROC> C14 male) 6500s/7600s/12ks etc take the even bigger C19/C20 connector.

ROC> Also, have a look at
ROC> http://www.accesscomms.com.au/iec320.htm to help 
ROC> identify the cable type.




More information about the cisco-nsp mailing list