[nsp] PA-2FE-TX NOT SHOWING UP/ERRORS

[Gert Doering]

Hi,

On Tue, Mar 30, 2004 at 01:34:18PM -0600, Mike Carter wrote:
> sorry for the missing info...yes it's a VIP2-40

On Tue, Mar 30, 2004 at 02:07:26PM -0600, Mike Carter wrote:
> I installed the pa-2fe-tx in slot-0, then installed the vip,
> then powered up the router. That's when it failed.

Hmmm, interesting.  If you check the cisco-nsp archives, you can see
that I had a similar-looking crash with a VIP2-40 and a PA-2FE-TX.

In my case, two different VIP2-40s and two different PA-2FE-TXs both
worked fine on FastEthernet port 0, but crashed when there was some
amount of traffic on FastEthernet port 1.

As long as I don't use FE port 1, the combo works flawlessly... - so it's
a different problem that has hit you.  As a first try, you could try
re-seating the PA-2FE (as has already been recommended) - this *does* fix
a number of VIP/PA problems.

gert

-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de