[nsp] Ethernet Errors - 6509

[Gert Doering]

Hi,

On Sun, May 30, 2004 at 08:43:53PM -0400, Wojtek Zlobicki wrote:
> I would also recommend that you play with the auto/full on both sides. While
> the general rule states that Auto is bad, it is the only way that works
> between vendors. 

Actually, "static/full" is much more likely to work than "auto".

The most important thing, hoever, is that you must NEVER set one side
to "auto" and the other to "static/full", because according to the autoneg
rules, this MUST result in a half-duplex/full-duplex mismatch.

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de