[c-nsp] RBE on the 7600 Platform

[Dan Armstrong]

Are you using the OSM blade?  I wouldn't really expect it to do RBE.  
The  WS-X6101 blade is the 1483 edge card for that platform. Each one 
would then show up as a VLAN interface.




JamesG wrote:

>Hi,
>
>I've been attempting to bring up a backup interface across our ATM
>network. I found that this ended up being impossible using RBE in
>conjunction with a 7600 series router.  I then contacted TAC and they
>told me that the 7600 platform does not support 1483b connections. 
>The strange thing that I found with regards to this configuration was
>the following.  One of the ethernet switches that was connected to
>this connection could see ARP entires coming from both directions yet
>no IP traffic was able to be passed across the connection.  The reason
>why we were trying to use the RBE connections was because the 7500
>series devices that we migrated from just supported the RBE rather
>easily.  Has anyone run into this same issue and if so, what kind of
>connections did you use to emulate the RBE connections on the 7600?
>
>Thanks in advance...
>
>-James
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/
>  
>