[c-nsp] 3550 High CPU Load

[Chris Strandt]

Thanks... the align command and "sh int stat" doesn't work on a 3550... 
can you suggest a different command that might work?

-Chris

Bruce Pinsky wrote:

> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Chris Strandt wrote:
> | Every so often, the CPU Util goes psyco on my Cisco 3550.  In the past,
> | a quick reboot solved the issue.  I recently upgraded IOS (to
> | 12.1(22)EA1a).
> |
> | Normally CPU is down around 20%.
> |
> | Any ideas?
> |
> | Dist1#show processes cpu
> | CPU utilization for five seconds: 92%/73%; one minute: 92%; five
> | minutes: 94%
>
>
> 92% is overall CPU usage and 73% is interrupt context.  That's either 
> real
> traffic being switched or realignments.  Check out Rodney Dunn's
> explanation at
> https://puck.nether.net/pipermail/cisco-nsp/2004-September/012925.html
>
> - --
> =========
> bep
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.2.2 (MingW32)
>
> iD8DBQFBnjhgE1XcgMgrtyYRAgCKAJwJOts8+MKqn5QQ7ZT02KfNPYhUDwCfaZtw
> NfM+XHvTEYDc13tu+DJw6yc=
> =mjDX
> -----END PGP SIGNATURE-----