[c-nsp] 7500 / Images w/o ethernet support?

[Tuc]

Hi,

	You'll have to excuse me. I've never worked on a 7500, know nothing
about them, trying to help a friend who knows even less.

	The router is a 7507 with an RSP4, 1 VIP2 with 2 FE, 1 VIP2 POS.

cisco RSP4 (R5000) processor with 262144K/2072K bytes of memory.
R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache
Last reset from power-on
G.703/E1 software, Version 1.0.
G.703/JT2 software, Version 1.0.
X.25 software, Version 3.0.0.
Chassis Interface.
1 VIP2 controller (2 FastEthernet).
1 VIP2 R5K controller (1 POS).
2 FastEthernet/IEEE 802.3 interface(s)
1 Packet over SONET network interface(s)
123K bytes of non-volatile configuration memory.

	It has the rsp-boot-mz.120-18.S1.bin on it in bootflash:/ and it
comes up and sees everything fine.

	He was given a "rsp-pv-mz.122-25.S1.bin" image. When he installed
it and did everything as per the doco, it came up, but came up without the
ethernets.  

 Cisco RSP4 (R5000) processor with 262144K/2072K bytes of memory.
R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache
Last reset from power-on
Chassis Interface.
1 VIP2 R5K controller (1 POS).
1 Packet over SONET interface
123K bytes of NVRAM.


	Is it possible for an image to not have the support for the ethernets?
If so, what image does he really need?

			Thanks, Tuc