[c-nsp] ip load-sharing per-packet and RPF

Marr, Joe jmarr at brodart.com
Tue Oct 12 10:32:37 EDT 2004

Is it possible to run "ip load-sharing per-packet" and "ip verify
unicast reverse-path" on the same interfaces?


I have 2 T1s that are load-balanced with my provider using "ip
load-sharing per-packet". When I set "ip verify unicast reverse-path" I
begin to lose every other packet. I had thought Unicast RPF was
compatible with CEF's per-packet and per-destination load sharing.


Thanks in advance,


Joe Marr


More information about the cisco-nsp mailing list