[c-nsp] ip load-sharing per-packet and RPF

[Rey Martin]

I think it's because your network  has asymmetrical routing (2T1 and load 
balanced?)

rey

----- Original Message ----- 
From: "Marr, Joe" <jmarr at brodart.com>
To: <cisco-nsp at puck.nether.net>
Sent: Tuesday, October 12, 2004 10:32 PM
Subject: [c-nsp] ip load-sharing per-packet and RPF


> Is it possible to run "ip load-sharing per-packet" and "ip verify
> unicast reverse-path" on the same interfaces?
>
>
>
> I have 2 T1s that are load-balanced with my provider using "ip
> load-sharing per-packet". When I set "ip verify unicast reverse-path" I
> begin to lose every other packet. I had thought Unicast RPF was
> compatible with CEF's per-packet and per-destination load sharing.
>
>
>
> Thanks in advance,
>
>
>
> Joe Marr
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/