[c-nsp] OC12 layer2 ?

[Anson Rinesmith]

Why not use Long shot fiber to Ethernet converter? Most switches come with a
gigE fiber port. Otherwise you would need routers with OC-12 interfaces on
both sides.

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of matthew zeier
Sent: Wednesday, October 27, 2004 5:58 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] OC12 layer2 ?


I need to run ethernet across an OC12.  Any clues as to what sort of gear 
I'd need at both ends?  Ideally I'd run an OC12 from a GSR to some box that 
acted like a switch/bridge.


--
matthew zeier, Sr. Network Engineer  | "Nothing in life is to be feared.
InteleNet Communications, Inc.       |  It is only to be understood."
(949) 784-7904                       |       - Marie Curie 

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/