[c-nsp] CT3 counters

[Rodney Dunn]

On Tue, Oct 26, 2004 at 06:35:16PM -0400, Bill Wichers wrote:
> > What the hell indeed!
> >
> > Is this limited just to the CT3IP I wonder, or does
> > the PA-MC-(2)T3 exhibit the same behavior?
> 
> Nope. Counters seem to be reasonable on my PA-MC-2T3+ in a VIP2-50 on
> 12.2(6a). Idle circuits and unused channels show zero bits/sec for both in
> and out, and the counters on the active circuits all look reasonable.
> Sounds like you're probably seeing something weird with the CT3IP blade,
> unless there is something specific to your release of IOS causing this.
> 
> I do see goofy things on multilink bundles on this PA, but that thread (I
> asked the list about it months ago) seemed to point at MPP issues with the
> release of IOS we're running on this particular aggregation router.

We fixed a bunch of counter bugs for dMLPPP for the MCT3 PA around
the 12.0(25)S timeframe.  I suggest 26S5 (when it goes on CCO
in a few weeks) or the latest 27S throttle for this if you are
in 12.0S code.

For 12.3 go with the latest mainline on CCO and it should have
the fixes I'm thinking about.

> 
>      -Bill
> 
> *****************************
> Waveform Technology
> UNIX Systems Administrator
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/