[c-nsp] faulty NPE-G1

[Nick Shah]

Hi Richard

There have been a few advisories regarding the NPE-G1s, and I have had
my share of issues with G1s (including most listed in the advisories,
but nothing like yours on a G1). I did notice a similar issue but that
was when one of our guys was trying to get a NPE-400 (and IO) to work
with a non-VXR chassis.

http://www.cisco.com/en/US/products/hw/routers/ps341/products_field_noti
ce09186a0080214d2e.shtml

http://www.cisco.com/en/US/products/hw/routers/ps341/products_field_noti
ce09186a008021fdb8.shtml

You could try reseating the NPE, but if it doesn't work, then its most
certainly gone fubar. (raise an RMA)

Rgds

Nick


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of richard bosire
Sent: Wednesday, 22 September 2004 3:59 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] faulty NPE-G1


Howdy'

I have  a brand new Cisco 7206VXR  with NPE-G1. I suspect to NPE-G1 to
have 
gone kaputt. It has been working ok in the test lab but now it doesnt
boot. 

when powered on,  the LEDs for power and Gi0/1-3 come on that is it ,
doesnt 
go through the usual boot up sequence .
Also there is nothing  being output on the console nor the Aux port,

Could it be dead or there is something else  I need to check?

regards

./bosire
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


------------------------------------------------------------------------------
This communication, including any attachments, is confidential. If 
 you are not the intended recipient, you should not read it - please 
 contact me immediately, destroy it, and do not copy or use any part of 
 this communication or disclose anything about it.

------------------------------------------------------------------------------