[c-nsp] faulty NPE-G1

[richard bosire]

Howdy Nick,

Thanx for the info 
I have tried reseating the NPE-G1 but still doesnt boot, I guess I have to 
raise an RMA

regards

./bosire

On Wednesday 22 September 2004 09:57, Nick Shah wrote:
> Hi Richard
>
> There have been a few advisories regarding the NPE-G1s, and I have had
> my share of issues with G1s (including most listed in the advisories,
> but nothing like yours on a G1). I did notice a similar issue but that
> was when one of our guys was trying to get a NPE-400 (and IO) to work
> with a non-VXR chassis.
>
> http://www.cisco.com/en/US/products/hw/routers/ps341/products_field_noti
> ce09186a0080214d2e.shtml
>
> http://www.cisco.com/en/US/products/hw/routers/ps341/products_field_noti
> ce09186a008021fdb8.shtml
>
> You could try reseating the NPE, but if it doesn't work, then its most
> certainly gone fubar. (raise an RMA)
>
> Rgds
>
> Nick
>
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of richard bosire
> Sent: Wednesday, 22 September 2004 3:59 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] faulty NPE-G1
>
>
> Howdy'
>
> I have  a brand new Cisco 7206VXR  with NPE-G1. I suspect to NPE-G1 to
> have
> gone kaputt. It has been working ok in the test lab but now it doesnt
> boot.
>
> when powered on,  the LEDs for power and Gi0/1-3 come on that is it ,
> doesnt
> go through the usual boot up sequence .
> Also there is nothing  being output on the console nor the Aux port,
>
> Could it be dead or there is something else  I need to check?
>
> regards
>
> /bosire
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
> ---------------------------------------------------------------------------
>--- This communication, including any attachments, is confidential. If you
> are not the intended recipient, you should not read it - please contact me
> immediately, destroy it, and do not copy or use any part of this
> communication or disclose anything about it.
>
> ---------------------------------------------------------------------------
>---