[c-nsp] 12.3 mainline on 7204 non VRX

[Rodney Dunn]

CSCee11101
Externally found severe defect: Closed (C)
NPE-100 and NPE-150 will not boot on new IOS images

While we try to keep old hardware working as we
move forward it's not always possible.  We had
to make a code change to the platform code for the 
new processors and unfortunately it broke
the old, old NPE-100 and NPE-150 which is end
of support.

Rodney


On Tue, Dec 07, 1999 at 03:57:47PM -0500, Krzysztof Adamski wrote:
> I'm trying to test 12.3.9b or 12.3.10 on my lab router, it is a 7204 with
> NPE-150 with 128MB of RAM.
> On boot right after the self decompression both .9b and .10 crash with:
> 
> *** Illegal Opcode Exception ***
> PC = 0x807f1dfc, Cause = 0x28, Status Reg = 0x34400002
> 
> The same thing happens if I load the IOS from a tftp server or ATA flash.
> 
> The router works fine with 12.2.15T14, so I don't think its the router, is
> the not VRX not supported in 12.3 mainline?
> 
> K
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/