[c-nsp] 12.3 mainline on 7204 non VRX

[Krzysztof Adamski]

So what is the lowest (ie cheapest) NPE I can use in my lab router that
will be good for at least a year?

K

On Mon, 27 Sep 2004, Rodney Dunn wrote:

> CSCee11101
> Externally found severe defect: Closed (C)
> NPE-100 and NPE-150 will not boot on new IOS images
>
> While we try to keep old hardware working as we
> move forward it's not always possible.  We had
> to make a code change to the platform code for the
> new processors and unfortunately it broke
> the old, old NPE-100 and NPE-150 which is end
> of support.
>
> Rodney
>
>
> On Tue, Dec 07, 1999 at 03:57:47PM -0500, Krzysztof Adamski wrote:
> > I'm trying to test 12.3.9b or 12.3.10 on my lab router, it is a 7204 with
> > NPE-150 with 128MB of RAM.
> > On boot right after the self decompression both .9b and .10 crash with:
> >
> > *** Illegal Opcode Exception ***
> > PC = 0x807f1dfc, Cause = 0x28, Status Reg = 0x34400002
> >
> > The same thing happens if I load the IOS from a tftp server or ATA flash.
> >
> > The router works fine with 12.2.15T14, so I don't think its the router, is
> > the not VRX not supported in 12.3 mainline?
> >
> > K
> >
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>