[c-nsp] Speaking of OIR... what about 6500s?

[Wojtek Zlobicki]

I've only encountered problems if not wearing a wrist strap,
electrical grounding can be a problem.
Some operators also need to be reminded that using a sledgehammer to
get the blade into the chassis is overkill :)

On 4/15/05, John Neiberger <John.Neiberger at efirstbank.com> wrote:
> Since I'm coming in this weekend anyway, I offered to install an FWSM in
> our 6513 for someone. As I recall, the 6500s handle OIR a lot better
> than the 7500s. I seem to remember being told that I could go pop that
> blade in right now and I wouldn't run into a problem on the 6500. Is
> that true? What is the consensus regarding OIR with the high end
> Catalyst switches?
> 
> Thanks,
> John
> --
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 


-- 
----------------------------------------
wojtek.zlobicki at gmail.com