[c-nsp] 2651XM

[Frank Paulsen]

Hello Thinley,

which terminal program uses you? UNIX Windows (PUTTY)
Is stored/save  a START-UP configuration?

Greeting Frank


Jichen Thinley schrieb:

>Hi
>
>We have a pecular problem of 2651XM model router, when it boots it does 
>not boot to the image it has it gives a strange charaters on the 
>temrinal screen. We set the console speed on 2600 bits, 9600,19200 bits 
>and hardware flow control on and off. We even changed the flash, we had 
>even tried the break sequence and it does not coem to ROMMON mode.
>
>Any suggestions and ideas how to recover. The router has all its led on 
>after the boot , power . LED etc..
>
>it gives this output when booting
>
>ￜ..gￜ..ￜ7.ￜRￜr.S.ￜ..gￜ..ￜ7.ￜRￜr.S.|
>
>
>
>Regards
>
>Jichen
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/
>