[c-nsp] CEF monitoring

[Rodney Dunn]

You can monitor the syslog output for a FIBDISABLE message.

I seem to recall a CEF MIB is in the works.

Rodney

On Tue, Apr 26, 2005 at 10:26:20AM +0530, jagannath wrote:
> How to monitor if CEF is running or not. due to high memory utilisation the 
> CEF process gets disabled and then the MPLS forwarding stops.
> 
> Want to know if there is any mechanism to monitor CEF or any corresponding 
> MIB alerts that can be configured.
> 
> 
> Jagannath
> 
> 
> ********** DISCLAIMER **********
> Information contained and transmitted by this E-MAIL is proprietary to 
> Sify Limited and is intended for use only by the individual or entity to 
> which it is addressed, and may contain information that is privileged, 
> confidential or exempt from disclosure under applicable law. If this is a 
> forwarded message, the content of this E-MAIL may not have been sent with 
> the authority of the Company. If you are not the intended recipient, an 
> agent of the intended recipient or a  person responsible for delivering the 
> information to the named recipient,  you are notified that any use, 
> distribution, transmission, printing, copying or dissemination of this 
> information in any way or in any manner is strictly prohibited. If you have 
> received this communication in error, please delete this mail & notify us 
> immediately at admin at sifycorp.com
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/